REALLY NICE ORIGINAL BAHNE SKATEBOARD W TRACKER TRUCKS, RED CLEAR LIFT PADS & DOGTOWN ROCK n ROLLER WHEELS. FOUND JUST AS YOU SEE FROM THE ORIGINAL OWNER ITS RIDEABLE AS IS BUT COULD USE A DETAILED REFURBISH/LUBE TO BRING IT BACK UP TO YOUR PERSONAL RIDING STANDARDS. THANKS FOR LOOKING AND GOOD LUCK!
The product is a set of vintage 70s Bennett Pro skateboard trucks with Road Rider 4 wheels. These classic trucks are manufactured in the United States. Perfect for collectors or enthusiasts looking to add a touch of nostalgia to their skateboarding setup. Wear is consistent with age.
Vintage nineteen seventies excalibur skateboarde and trucks. Tried to get all imperfections if you want a closer look at anything msg me. Please look at all pics for condition.
1975 BAHNE complete skateboard SPECS and condition: the Real Deal (see my feedback comment at the bottom): DECK. 1975 or possibly 1976 orange Bahne fiberglass deck. 26″ long (1974 models were 24″). Serial number: 027 01379. Deck is in VG condition! Expected scuffs & scrapes, of course, and some typical “curb kissing” damage at the nose. Original Bahne trucks were removed, and deck was re-drilled for ACS-500 trucks. New “Bahne logo” cutout griptape. First generation ACS-500 trucks, in superb condition. “Figure 8″, silver baseplates (not the later black rectangle baseplates). Early edition flathead kingpins (not the later hex head kingpins). Original bushings, AND the original red pivot cups (99% of the time those wore out and got replaced by black pivot cups; not common to find ACS trucks with the original red pivot cups). All original parts (kingpins, nuts, bushing cups). Excellent condition translucent ” Ruby Red” Pipeline “Pacer” wheels. Of course loose ball bearings. I disassembled all the wheels, and cleaned & lubed the bearings and bearing runners/casings. They spin GREAT (see video). Original hardware was completely rusted out. So new mounting hardware (but original axle nuts, as stated). See my feedback: 2,953 positives, ZERO negatives. I owned & ran the skateboard company Latter-Day Skates for a decade starting in 2000. I’m a 100% straight-shooter.
Here is a rare one: G&S Gordon and Smith Stacy Peralta Warptail 2. The original version, with the original “Warp Tail” sticker (the same sticker on the solid deck version from 1976), without wheel wells, and only 27 long. Probably 1977, as later models of the same deck were 29, had the different/new Warptail logo, and then had wheel wells. But here’s what makes it special : Notice the green-to- red/orange “fade” G&S logo! In the 1980s and’90s G&S released several decks with G&S “fade” logos. But I’ve only seen one other 1970s deck with the fade, and that was like 45 years ago or something, so I don’t even remember what model it was. If anyone out there knows anything about these Warptail 2 decks with this fade G&S logo, by all means let me know! SPECS and condition: the Real Deal (see my feedback comment at the bottom): DECK. 27 version with green/red or orange? Gordon & Smith “Stacy Peralta signature” top sticker is in great condition. Bottom has noticeable water stains (see pics). Tail & nose have the classic curb slam damage. Deck is not “restored, ” but cleaned. NOTE: The griptape is original (but cleaned), except for the tail section. The griptape was completely missing near the tail. Rather than re-grip the entire deck with new griptape, I thought it better to simply replace the tail section. ACS-500 trucks w/the OG (earlier years) flathead kingpin (not the later hex-nut head kingpins). Original bushings, but not the original red pivot cups (as was usually the case, those wore out and were replaced at some point). Original bright, semi-translucent orange wheels. Loose ball bearings (cleaned & lubed) — Note that while sealed precision bearings were introduced a couple years earlier, many skateboards still came with loose ball bearings at this point. My boards in 1975-’77 still had loose ball bearings, until I got some Road Rider 4s in 1977. Super bright colored, matching the risers and colored G&S logo. 1970s orange rubber or urethane? Obviously slightly larger risers were used at some point. Black hard plastic skid plate made by Sea Breeze. Original hardware was completely rusted out (couldn’t even remove the nuts to clean the trucks). See my feedback: 2,954 positives, ZERO negatives. I owned & ran the skateboard company Latter-Day Skates for a decade starting in 2000. I’m a 100% straight-shooter.
The World Industries Skateboarding Deck featuring the Bruce Will Lee model is a vintage double kick skateboard with a nostalgic theme inspired by the 90s. This collectible piece of sporting goods brings back memories of the iconic World Industries brand and is perfect for skateboarding enthusiasts looking for a unique and classic board to add to their collection.
This is a pair of vintage Gullwing Super Pro Mach V skateboard trucks from the 1980s. They are 9 in length and are considered to be very rare. The trucks are designed for skateboarding and are made in the United States. The brand is Gullwing, and the model is the Gullwing Super Pro Mach V. The trucks have a retro vibe and are perfect for any skateboarder who wants to add a touch of The 80s to their setup.
Nice Stage 2 Indy 169s with very little wear. Used but not abused with looks to be all original with OG red bushings. Please check all of the pictures provided for your condition and authentic concerns. Also, I’ll throw in one original old-school coper for your back truck (like we used to do)! Ditch grinds for days lol. Would be great on an old school rebuild to skate or display. Taking the hit to make some Christmas cash. I want you to be happy! Happy Thanksgiving, Merry Christmas and best to you and all of yours. Eric in Carmine, TX.
